Confirms a domain redirects to the destination you set
Preferences: an invalid goal (502), an invalid expected code (504) or a goal on the same address as the monitored URL (503) ends the audit before any request.
Follow: sends a GET request as 37AuditsBot and follows each Location by hand, up to 10 hops. Only HTTP redirects count: meta refresh and JavaScript redirects are not followed.
Blocks: a block on any address before the goal ends the audit with 590. An HTTP 403 or 429 on the goal itself does not, because the redirect has already arrived.
Compare: the scheme, host and port where the redirects end must match the goal exactly. www.nuplia.com.br and nuplia.com.br are different hosts. The landing path is ignored, so https://www.nuplia.com.br/en matches the goal https://www.nuplia.com.br.
Arrival hop: the redirect code is judged on one hop only, the first one whose target is on the goal. Hops before it are the source domain's own housekeeping (http to https, apex to www; see the HTTP Redirect auditor). Hops after it are the goal site's own routing, such as / to /en.
Aggregate: ERROR wins, then FAIL, then WARNING. When every rule passes the audit is SUCCESS (200).
For nuplia.com with the goal https://www.nuplia.com.br:
https://nuplia.com/ 301 β https://www.nuplia.com/ source housekeeping, not judged
https://www.nuplia.com/ 302 β https://www.nuplia.com.br/en arrival hop, judged
With expectedRedirectCode blank this warns (300), because the arrival hop is temporary. With expectedRedirectCode set to 302 it passes.
Every row maps to one checkRule* method and one CheckCode, in the order the auditor runs them. CheckCode suffixes use status ranges: 200 success, 300β399 warning, 400β499 fail, 500β599 error.
| CheckCode | Status | When it fires | Recommendation | Why it matters |
|---|---|---|---|---|
37A-DomainRedirectAuditor-502 | ERROR | The Goal domain is not an http:// or https:// address with only a scheme and a host. | Change Goal domain from "{value}" to a scheme and host only, such as https://www.example.com. | β |
37A-DomainRedirectAuditor-504 | ERROR | The Expected redirect code is not 301, 302, 303, 307 or 308. | Change Expected redirect code from {value} to 301, 302, 303, 307 or 308, or leave it blank to accept any permanent redirect. | β |
37A-DomainRedirectAuditor-503 | ERROR | The Goal domain is on the same scheme, host and port as the monitored URL. | Change Goal domain from {goal} to the site {url} should redirect to. | β |
37A-DomainRedirectAuditor-501 | ERROR | A host of the monitored URL or of a redirect does not resolve in DNS. | Add an A or AAAA record for {host}, or stop monitoring this URL if the domain is retired. | β |
37A-DomainRedirectAuditor-500 | ERROR | An address could not be read: timeout, connection failure, or HTTP 5xx before the goal. | Make sure {failedUrl} answers within 10 seconds, then run the audit again. Last error: {error}. | β |
37A-DomainRedirectAuditor-400 | FAIL | The monitored URL answers with something other than a redirect. | Make {url} answer with a 301 redirect to {goal}. | Visitors and links that use this domain stay on it, so traffic and search rankings never reach your main site. |
37A-DomainRedirectAuditor-403 | FAIL | A hop answers with a redirect status but no Location that an HTTP client can follow. | Add "Location: {goal}" to the HTTP {status} response of {hopUrl}. | A redirect without a destination leaves browsers on an error page, so visitors never reach your site. |
37A-DomainRedirectAuditor-404 | FAIL | The redirects come back to an address already visited, or go past 10 hops. | Remove the loop at {lastUrl} so {url} reaches {goal} in one 301 redirect. | Browsers give up with a "too many redirects" error, so visitors of this domain see no site at all. |
37A-DomainRedirectAuditor-401 | FAIL | The redirects end on a host that is not the host of the goal. | Change the redirect of {lastHopUrl} from {landingUrl} to {goal}, or update the Goal domain preference if {landingHost} is the new destination. | Visitors and links end up on a site you did not choose, which loses the traffic and can hand it to an old or third-party site. |
37A-DomainRedirectAuditor-402 | FAIL | The redirects end on the host of the goal, but with another scheme. | Make the redirect of {lastHopUrl} point to {goal} instead of {landingUrl}. | Visitors reach the right site on an address you did not choose, which splits search rankings and can leave them on an unencrypted connection. |
37A-DomainRedirectAuditor-405 | FAIL | The redirects end on the goal, on a page that answers HTTP 404, HTTP 410 or HTTP 5xx. | Fix {landingUrl} on {goalHost}, or point the redirect at a page that exists. | The redirect works, but it delivers visitors to an error page, so they leave and the traffic is lost. |
37A-DomainRedirectAuditor-300 | WARNING | The arrival hop does not use the Expected redirect code, or is not permanent when that preference is blank. | Change the redirect of {hopUrl} to {target} from HTTP {status} to {expected}, or update the Expected redirect code preference if HTTP {status} is intended. | The redirect does not behave as you chose: a temporary one keeps search rankings on the old domain, and a permanent one is remembered by browsers and is hard to undo. |
37A-DomainRedirectAuditor-200 | SUCCESS | All rules passed. Message is {url} reaches {landingUrl} in {hopCount} hops, arriving on the goal {goal} with HTTP {status}. | β | β |
37A-DomainRedirectAuditor-590 | ERROR | The audited page answered HTTP 403, HTTP 429 or a Cloudflare challenge, so 37AuditsBot was blocked before it could read the page. | Allow 37AuditsBot in your firewall or bot protection: allowlist its user agent, or verify its Web Bot Auth signature. See https://www.37audits.com/bot. | While 37AuditsBot is blocked this audit cannot look at the site, so problems on it go unreported. |
| Status | Description | Test logic |
|---|---|---|
| SUCCESS | The URL reaches the goal with the expected redirect | Scheme, host and port match the goal, and the arrival hop uses the expected code (200). |
| WARNING | The goal is reached with another redirect code | Arrival hop differs from the Expected redirect code, or is temporary when that is blank (300). |
| FAIL | Visitors do not reach the goal, or reach a broken page | No redirect (400); wrong host (401); wrong scheme (402); no usable Location (403); loop or more than 10 hops (404); error page on the goal (405). |
| ERROR | The auditor could not test the redirect | Connection failure or HTTP 5xx before the goal (500); host does not resolve (501); invalid preference (502, 504); goal is the monitored URL (503); site blocked 37AuditsBot (590). |
Nobody on your team visits these domains, so a redirect lost in a hosting, DNS or CDN change can stay broken for months while old links and ads keep sending people there.
Registering a domain and forgetting its redirect leaves traffic on a parked page, or on an old site you no longer maintain.
Use 301 or 308 when the move is final: search engines transfer rankings to the goal and browsers remember the redirect.
Use 302 or 307 when the destination may change, for example while a country site is being launched. Set Expected redirect code so the audit does not warn about it.
Browsers can remember a permanent redirect for a long time, so changing its destination later does not reach every returning visitor.
Only the monitored URL is followed. Add each variant you care about (http://, www.) as its own monitored URL.
A temporary redirect before the arrival hop is not reported.
Meta refresh and JavaScript redirects count as no redirect (400). Search engines handle them less reliably than HTTP redirects.
This documentation is built and hosted on Mintlify, a developer documentation platform.
Add this auditor to your monitoring setup and start identifying issues on your websites today.